Your Simple Guide To Quilting Rotary Cutters – Part 1
Sponsored LinksOne of the most vital tools in making a patchwork quilt is a rotary cutter. I remember how I used to draw lines on fabric, then cut out my pieces with scissors.
I just balk at even the idea of that now. So where do you start when buying your first rotary cutter?
Well there are lots of types of cutters available, all with different size blades, different shaped handles and a selection of protective sheaths.
Usually bigger blades are used to chop through thicker fabric such as flannelette, or a number of layers of cloth at one point. Though the more fabric layers you cut through the less precise you can become. So it’s best when starting to just start with one or two layers to gain confidence.
Blade Sizes
Rotary cutters come in a considerable number of different sizes which include 18mm, 28mm, 45mm and 60mm in diameter. Smaller blades are excellent for cutting around curves, smaller templates, and finer work but you will find generally the larger blades will be more helpful.
The 45mm is the most commonly used and a good choice for all general fabric cutting needs. You’ll find this size is the one you reach for the most.
New Blades and Sharpening
When you purchase a rotary cutter it’ll routinely include one blade and occasionally a spare. It can be quite costly buying new blades every time they get blunt. What is so great about these blades is that they can be sharpened!
The sharpeners can be found in assorted sizes of blades but will only fit one size blade per sharpener. A blade can be sharpened 6 or more times before it has to get replaced.
The down side is if you have more that one size blade you’ll need to purchase a sharpener for each size. Something to contemplate when purchasing different size cutters.
If however your blade has a nick out of it, maybe from dropping it or cutting into your ruler, you’ll potentially not be able to sharpen it adequately and it’ll need to get replaced.
Make sure you buy the right blade for your cutter as the hole shape in the center of the blade varies according to the make of cutter. For example, “Kai” cutters have a round mounting hole with 2 squares cut out of it on opposite sides, while Olfa blades have a triangular shaped mounting hole.
That is it for this article, keep your eyes open for part 2 where we cover handles and maintenance.
Until then, happy quilting!
To get more great tips about how to make a patchwork quilt, check out Jane Green’s how to make a patchwork quilt web site now!
categories: australian patchwork and quilting,how to make a patchwork quilt,patchwork bedding,patchwork blocks,patchwork material,patchwork quilt,patchwork sewing,patchwork templates,patchwork throw,quilt,quilts